Overview
FPV drone propulsion systems combine a brushless outrunner motor, a matched ESC and a propeller load profile into one tuned unit. The set determines thrust response, throttle linearity and thermal behaviour during the short, high-current bursts that characterise first-person-view flight.
Motor Architecture
Motors in this category use an outer-rotor brushless layout with N42SH or N45SH arc magnets, a 12N14P or 12N16P stator and single-strand or multi-strand copper windings. Rotor bells are machined from 7075 aluminium and balanced after assembly. Shaft diameters range from 1.5 mm to 5 mm depending on prop size and thrust target.
Thrust and Current Relationship
Selection is driven by the thrust-to-current curve rather than a single KV number. A 5-inch freestyle set typically targets 1.4 to 1.8 kg thrust per motor at 60 to 75 percent throttle on 6S, while a 3.5-inch cinewhoop set targets 400 to 600 g per motor at lower peak current to protect ducted frames. Winding KV, stator size and prop pitch are specified together so the motor reaches rated thrust without exceeding its continuous current limit.
Thermal Design
Continuous current ratings assume 25 C ambient and 3 to 5 m/s airflow. Bell venting, stator coating and bearing selection are adjusted per application; racing sets prioritise short-burst thermal headroom, long-range sets prioritise steady-state dissipation.
Introduction
Detailed Parameters and Performance Data
Introduction
Jiangsu Retek Motion Co., Ltd. supplies FPV drone propulsion systems to airframe builders, racing teams and OEM drone brands. Each set is specified against a customer frame, prop and battery combination rather than selected from a fixed catalogue.
How We Work
Retek operates three platforms: motors, die-casting and CNC machining, and wire harness assembly. For drone propulsion this means rotor bell, stator stack, shaft and lead harness are produced and matched within one supply chain, which shortens iteration when thrust targets or frame mounts change.
Engineering Approach
Because every model is customized, the engineering team reviews the frame mass, prop diameter, cell count and target flight time before recommending a winding and stator size. Samples are then tested on the customer prop before volume release.
Applications
Advanced Technology Highlights
Applications
5-inch freestyle and racing quads
3 to 3.5-inch cinewhoop and ducted frames
Long-range cruiser builds
FPV simulators and training rigs
Custom airframe prototypes for OEM brands
Technical Specifications
Industrial & Commercial Usage
Specifications
| Parameter | Typical Range |
| Stator size | 2207, 2306, 2806.5, 3110 |
| Configuration | 12N14P, 12N16P |
| KV range | 1200 to 2800 KV |
| Cell count | 4S to 6S |
| Peak current | 25 to 45 A |
| Shaft diameter | 1.5 to 5 mm |
| Bearing type | Ceramic hybrid or steel |
| Rotor material | 7075 aluminium |
Additional Information
Supplementary Details & Notes
Production and Customization
Custom KV, stator size and shaft length per airframe
Custom lead length, wire gauge and connector
Laser marking and packaging to brand requirements
Sample runs before volume release, with test data
RFQ reviewed by engineering, not by catalogue lookup
About Jiangsu Retek Motion Co., Ltd.
As China FPV Drone Propulsion Systems Manufacturers and Wholesale FPV Drone Propulsion Systems OEM/ODM Suppliers, Retek business consists of three platforms: Motors, Die-Casting and CNC manufacturing and wire harness. Retek products are widely supplied for residential fans, vents, boats, airplanes, medical facilities, laboratory facilities, trucks and other automotive machines.
Welcome to send us an RFQ, it is believed you will get the best cost-effective products and services here!

Get in touch
English
Deutsch
中文简体
Español
