Overview
Agricultural spray drone power systems are specified around payload, spray duration and dust exposure rather than around peak thrust alone. A spray drone motor must hold steady thrust across a long flight with a full tank, tolerate pesticide mist and field dust, and keep bearing temperature within range through repeated daily cycles.
Motor Architecture
These motors use large-stator outrunner layouts, typically 8318, 10015 or 12020 sizes, with 36N42P or 24N28P configurations, N45SH magnets and thick single-strand windings. Housings are IP-protected and stators are triple-coated to resist moisture and chemical ingress. Shafts are 10 to 15 mm to carry folding prop loads.
Duty Cycle and Thermal Behaviour
A spray mission is a long low-to-mid throttle profile, unlike the burst profile of FPV. Continuous current rating therefore matters more than peak current. Motors are specified so winding temperature stabilises below insulation class limit at the drone rated spray speed, with margin for 35 C field ambient.
Introduction
Detailed Parameters and Performance Data
Introduction
Jiangsu Retek Motion Co., Ltd. builds agricultural spray drone power systems for drone OEMs and agricultural service operators. Each motor is specified against tank volume, spray width, nozzle count and expected daily flight hours.
How We Work
Retek runs motor, die-casting and CNC, and wire harness platforms under one roof. For spray drones this allows the motor housing, stator assembly and sealed lead harness to be developed together, which matters when the enclosure must resist chemical mist and field dust.
Engineering Approach
The team reviews payload, prop size, cell count and spray speed before recommending stator size and winding. Prototypes are run through a duty-cycle test that mirrors the customer mission profile rather than a short bench burst.
Applications
Advanced Technology Highlights
Applications
10 to 16 L crop spraying drones
20 to 40 L wide-swath spray platforms
Orchard and vineyard spray UAVs
Seed and granular spreader drones
Agricultural survey and mapping UAVs
Technical Specifications
Industrial & Commercial Usage
Specifications
| Parameter | Typical Range |
| Stator size | 8318, 10015, 12020 |
| Configuration | 36N42P, 24N28P |
| KV range | 80 to 120 KV |
| Cell count | 12S to 14S |
| Continuous current | 15 to 40 A |
| Peak thrust per motor | 10 to 25 kg |
| Shaft diameter | 10 to 15 mm |
| Protection | IP45 to IP54 |
Additional Information
Supplementary Details & Notes
Production and Customization
Custom stator size, KV and shaft for payload class
IP protection level specified per field environment
Sealed harness with customer connector
Duty-cycle test report before volume release
Spare part kits and field documentation on request
About Jiangsu Retek Motion Co., Ltd.
As China Agricultural Spray Drone Power Manufacturers and Wholesale Agricultural Spray Drone Power OEM/ODM Suppliers, Retek business consists of three platforms: Motors, Die-Casting and CNC manufacturing and wire harness. Retek products are widely supplied for residential fans, vents, boats, airplanes, medical facilities, laboratory facilities, trucks and other automotive machines.
Welcome to send us an RFQ, it is believed you will get the best cost-effective products and services here!

Get in touch
English
Deutsch
中文简体
Español
