Overview
Heavy-lift drone motors are specified for payload capacity, structural stiffness and thermal endurance under continuous load. These platforms carry cargo, industrial sensors or specialized equipment, so the motor must deliver stable thrust over long flights and withstand the vibration and bending loads of large props.
Motor Architecture
Heavy-lift motors use large-stator outrunner designs, typically 10015, 12020 or larger, with 36N42P configurations, N45SH magnets and thick single-strand windings. Housings are machined or die-cast with reinforced mounts, shafts range from 12 to 20 mm, and bearings are selected for high radial load.
Structural and Thermal Margin
Because prop diameter is large, bending load on the shaft and bell is a primary design constraint, not only thrust. The bell, shaft and bearing stack are specified together for the prop mass and RPM range. Continuous current rating is set for the longest expected mission with margin for 35 C ambient.
Introduction
Detailed Parameters and Performance Data
Introduction
Jiangsu Retek Motion Co., Ltd. supplies heavy-lift drone motors to cargo UAV builders, industrial platform integrators and specialized equipment manufacturers. Each motor is specified against payload, prop size and mission duration.
How We Work
Retek operates motor, die-casting and CNC, and wire harness platforms. For heavy-lift platforms this allows the reinforced housing, large shaft and high-current harness to be developed as one assembly, which matters when bending loads and thermal margin are both constraints.
Engineering Approach
The team reviews payload, prop diameter, cell count and mission duration, then specifies stator size, shaft diameter and bearing type together. Prototypes are tested under continuous load rather than short bursts.
Applications
Advanced Technology Highlights
Applications
Cargo and logistics UAVs
Industrial inspection platforms with heavy sensor payloads
Firefighting and emergency response drones
Tethered power platforms
Research and test-bed multi-rotors
Technical Specifications
Industrial & Commercial Usage
Specifications
| Parameter | Typical Range |
| Stator size | 10015, 12020 and larger |
| Configuration | 36N42P |
| KV range | 60 to 100 KV |
| Cell count | 12S to 14S |
| Continuous current | 25 to 60 A |
| Peak thrust per motor | 20 to 40 kg |
| Shaft diameter | 12 to 20 mm |
| Housing | Reinforced machined or die-cast aluminium |
Additional Information
Supplementary Details & Notes
Production and Customization
Custom stator, KV and shaft for payload class
Reinforced mount and housing per frame
High-current harness and connector per order
Continuous-load test report with samples
Batch traceability for industrial programs
About Jiangsu Retek Motion Co., Ltd.
As China Heavy-Lift Drone Motors Manufacturers and Wholesale Heavy-Lift Drone Motors OEM/ODM Suppliers, Retek business consists of three platforms: Motors, Die-Casting and CNC manufacturing and wire harness. Retek products are widely supplied for residential fans, vents, boats, airplanes, medical facilities, laboratory facilities, trucks and other automotive machines.
Welcome to send us an RFQ, it is believed you will get the best cost-effective products and services here!

Get in touch
English
Deutsch
中文简体
Español
