Overview
Custom drone motor engineering starts from the airframe and mission rather than from a catalogue model. Frame mass, prop diameter, cell count, target flight time and control bandwidth are translated into stator size, winding KV, magnet grade and shaft geometry before a prototype is built.
Engineering Process
The process moves through requirement review, electromagnetic sizing, mechanical layout, prototype winding, bench test on the customer prop, and design freeze. Each stage produces a document the customer can review, so changes are recorded rather than carried informally between samples.
Electromagnetic and Mechanical Sizing
Stator diameter and stack length set the torque constant, while winding turns and wire gauge set KV and resistance. Shaft diameter, bearing spacing and bell thickness are sized for prop bending load and RPM. These variables are solved together because a change in one shifts the others.
Verification
Prototypes are tested for thrust, current, temperature and vibration on the prop the customer intends to use. Test data is compared against the target envelope before volume release.
Introduction
Detailed Parameters and Performance Data
Introduction
Jiangsu Retek Motion Co., Ltd. provides custom drone motor engineering for airframe builders and OEM drone brands. Motors are developed against a customer specification rather than selected from a fixed catalogue, and every model is customized.
How We Work
Retek operates motor, die-casting and CNC, and wire harness platforms. Engineering, tooling and assembly sit within one supply chain, which allows a stator change, a housing change and a harness change to be coordinated in the same iteration.
Engineering Approach
The team works from the customer mission profile and reviews requirements before proposing a design. Prototype data is shared with the customer at each stage, and design freeze follows sign-off on measured performance.
Applications
Advanced Technology Highlights
Applications
New airframe development programs
Propulsion upgrades for existing platforms
Specialized payload and endurance missions
OEM branding and mechanical integration
Replacement of discontinued propulsion sets
Technical Specifications
Industrial & Commercial Usage
Specifications
| Parameter | Engineering Range |
| Stator size | 1104 to 12020 and beyond |
| Configuration | 9N12P to 36N42P |
| KV range | 60 to 3000 KV |
| Cell count | 2S to 14S |
| Shaft diameter | 1.5 to 20 mm |
| Mount pattern | Custom per frame |
| Prototype lead time | Depends on tooling scope |
| Test data | Thrust, current, temperature, vibration |
Additional Information
Supplementary Details & Notes
Production and Customization
Requirement review and electromagnetic sizing
Prototype winding and mechanical layout
Bench test on customer prop with data report
Design freeze and volume release
RFQ reviewed by engineering with a documented response
About Jiangsu Retek Motion Co., Ltd.
As China Custom Drone Motor Engineering Manufacturers and Wholesale Custom Drone Motor Engineering OEM/ODM Suppliers, Retek business consists of three platforms: Motors, Die-Casting and CNC manufacturing and wire harness. Retek products are widely supplied for residential fans, vents, boats, airplanes, medical facilities, laboratory facilities, trucks and other automotive machines.
Welcome to send us an RFQ, it is believed you will get the best cost-effective products and services here!

Get in touch
English
Deutsch
中文简体
Español
