What Makes a Great FPV Racing Motor?

High KV FPV drone motors are the defining component for competitive freestyle and racing multirotor platforms. Operating at voltage ratings from 3S to 6S LiPo, these outrunner brushless motors combine ultra-low weight (often below 30 g) with KV ratings spanning 1800 KV to 14 000 KV, enabling the rapid throttle response and peak RPM that FPV pilots demand. Jiangsu Retek Motion Co., Ltd. engineers each motor stator from N52 sintered NdFeB magnets and cold-drawn copper windings to deliver the highest thrust-to-weight ratios commercially available, with OEM customization available for bell diameter, KV value, and wire-exit style.

Related Products

LN3115 900KV FPV Brushless Motor 6s 8~10 Inch Propeller Long Range Drone

LN3115 900KV FPV Brushless Motor 6s 8~10 Inch Propeller Long Range Drone

View Details
20000RPM High Speed Personal Handheld Fan Motor 7.2VDc wo22 Series

20000RPM High Speed Personal Handheld Fan Motor 7.2VDc wo22 Series

View Details
Dual voltage 230VAC/12VDC into one drive for remote area solar panel power supply system W70 Series with metal shell

Dual voltage 230VAC/12VDC into one drive for remote area solar panel power supply system W70 Series with metal shell

View Details
Ai Camera monitor system compact design brushless dc motor

Ai Camera monitor system compact design brushless dc motor

View Details
Single Phase Induction Motor Y124125

Single Phase Induction Motor Y124125

View Details
LN1505 1800KV 2200KV 2600KV Brushless Motor for RC Drone FPV

LN1505 1800KV 2200KV 2600KV Brushless Motor for RC Drone FPV

View Details

Introduction

Detailed Parameters and Performance Data

RETEK: Precision High-KV Outrunners Engineered for FPV Performance

Jiangsu Retek Motion Co., Ltd. provides high-KV FPV drone motors for racing and freestyle multirotor OEM brands where thrust-to-weight ratio and throttle response are the definitive performance metrics. We engineer each stator with N52-grade sintered NdFeB magnets rather than lower-grade N48 alternatives, yielding measurably higher torque per ampere in the same bell diameter. Our winding process uses precision-drawn copper wire with consistent cross-section tolerance, eliminating inter-turn resistance variation that causes KV spread across a production batch. Every FPV motor we supply is designed exclusively for the buyer's specification — KV, wire-exit direction, shaft diameter, anodised bell color — and is never offered through any distributor channel, ensuring your branded motor remains exclusive to your product line.

Applications

Advanced Technology Highlights

Applications

  • 5-inch freestyle FPV quad builds requiring high-RPM cornering response
  • 3-inch and 4-inch cinewhoop platforms for protected-prop filming
  • Micro 2-inch toothpick builds (0802, 1103 stators) for indoor racing
  • Sub-250 g ultralight race drones subject to unregistered UAV thresholds
  • OEM kits for FPV brand-complete RTF drone manufacturers
  • Drone simulation training hardware replicating real-world thrust curves

Technical Specifications

Industrial & Commercial Usage

Specifications

Feature Details
KV Range 1800 KV – 14 000 KV
Typical Frame Size 2" – 5" props (80–225 mm)
Voltage 3S – 6S LiPo (11.1 V – 25.2 V)
Motor Sizes (stator) 0802, 1103, 1404, 1505, 1806, 2207, 2807
Motor Weight 5 g – 34 g depending on stator
Max Continuous Current Up to 40 A (size-dependent)
Shaft Diameter 1.5 mm – 3 mm
Bearing Type Dual high-speed ABEC-5 ball bearings
Magnet Material N52 sintered NdFeB
MOQ (OEM) 100 pcs per model

Additional Information

Supplementary Details & Notes

Production and Customization Services

Retek Motion's FPV motor customization workflow covers the full product development cycle from specification to production-ready sample.

  • KV Binning Service: Custom target KV (±3% tolerance) engineered by adjusting winding turns and wire gauge; validated on a calibrated KV meter before shipment.
  • Bell Anodising: CNC-machined aluminum bells anodised in any Pantone-matched color for brand differentiation; minimum batch 200 pcs.
  • Laser Engraving: Model name, KV rating, and brand logo engraved on bell or base plate; no minimum above standard MOQ.
  • Wire Exit Configuration: 3-phase lead wire length, gauge, and connector type (bare, JST, Amass) configured per buyer's ESC harness layout.
  • Stator Silicon Steel Grade: 0.2 mm or 0.35 mm lamination thickness selectable to balance eddy-current loss against mechanical rigidity for the target RPM range.
  • Conformal Coating: Winding encapsulant applied for moisture and chemical resistance where the motor will operate near fuel, coolant, or spray.

Service & Support

Advantages

  • Ultra-Low Rotating Mass: Lightweight aluminum bell and thin-wall stator minimise inertia, producing snappier stick response than heavier competitors.
  • Multi-KV Per Frame: Multiple KV options per stator size let OEM buyers tune thrust-to-efficiency ratio without retooling.
  • N52 Magnet Grade: Higher flux density than common N48 magnets increases torque per ampere and extends motor life under sustained high-load conditions.
  • Full OEM Customization: Bell color, logo engraving, KV binning, and wire length configured per order.
  • Certified Quality: CE and RoHS documentation available; ISO 9001-aligned production process.

Frequently Asked Questions

  • Q: What is the difference between a 2207 1700 KV and a 2207 2400 KV motor?
  • A: Both share the same 22 mm stator diameter and 7 mm height but differ in winding turns. The 1700 KV variant produces more torque at lower RPM, suiting heavier 5-inch props and 6S batteries for efficiency-focused builds. The 2400 KV variant spins faster with lighter loads, preferred for 4S racing setups demanding peak acceleration.
  • Q: Can I get custom KV values outside your standard range?
  • A: Yes. Custom KV binning is available for OEM orders of 500 pcs or more. Retek Motion's engineering team will validate winding specs against your target battery voltage and propeller pitch before production.
  • Q: Do these motors come with ESC recommendations?
  • A: Each product page includes a recommended ESC current rating. For high-KV micro motors (0802, 1103), a 5 A–10 A ESC is standard; for 2207 and 2807 stators, 35 A–45 A ESCs are recommended.
  • Q: Are the motors waterproof?
  • A: Standard FPV motors are splash-resistant but not IP-rated. Conformal coated windings are available as an OEM option for humid or light-rain environments.

Resources

Advanced Material Selection Guide

Material choices across four subsystems determine a high-KV FPV motor's durability, efficiency, and maximum RPM ceiling.

  • Magnet Grade — N52 vs. N48: N52 NdFeB provides approximately 8% higher remanence (Br) than N48, translating to higher air-gap flux density and more torque per ampere. The trade-off is a slightly lower Curie temperature (60 °C operating limit vs. 80 °C for N48H), making N52 suitable for racing motors where bursts are short but unsuitable for sustained-hover industrial motors.
  • Stator Lamination Steel — 0.2 mm vs. 0.35 mm: Thinner 0.2 mm laminations reduce eddy-current losses at high electrical frequencies (above 500 Hz), improving efficiency at 10 000+ RPM. Thicker 0.35 mm laminations offer better mechanical rigidity, preferred for large-diameter, lower-KV motors where frequency is lower.
  • Bell Alloy — 7075-T6 vs. 6061-T6: 7075-T6 aluminum (tensile strength ~570 MPa) is specified for racing motors subject to crash loads and high centrifugal stress. 6061-T6 (tensile strength ~310 MPa) is adequate for lighter-duty cinewhoop applications and offers better anodising finish quality.
  • Shaft Steel — 440C Stainless vs. Carbon Steel: 440C stainless is preferred for motors used near water, fuel mist, or chemical spray; carbon steel shafts are standard for indoor/dry race environments where weight minimisation is primary.
  • Bearing Grease — Standard vs. High-Speed: High-speed NLGI-1 synthetic grease is standard for FPV motors above 20 000 RPM; heavier NLGI-2 grease increases drag torque and is not recommended for high-KV racing applications.

About Jiangsu Retek Motion Co., Ltd.

Unlike other motor suppliers, Retek engineering system prevents the selling of our motors and components by catalogue as every model is customized for our customers. The customers are assured that every component they receive from Retek is designed with their exact specifications in mind. Our total solutions are a combination of our innovation and a close working partnership with our customers and suppliers.

As China High KV FPV Drone Motors Manufacturers and Wholesale High KV FPV Drone Motors OEM/ODM Suppliers, Retek business consists of three platforms: Motors, Die-Casting and CNC manufacturing and wire harness. Retek products are widely supplied for residential fans, vents, boats, airplanes, medical facilities, laboratory facilities, trucks and other automotive machines.

Welcome to send us an RFQ, it is believed you will get the best cost-effective products and services here!
Customized Solutions
Quality Assurance
Global Export
Jiangsu Retek Motion Co., Ltd.
<

Recommended LINS

High Torque Brushless DC Motors Industrial Drone Motors – High Thrust High Power Brushless DC Motors High Voltage DC Brushed Motor 90V 180V High Torque Nema 23 Stepper Motor 8-Wire Bi-Polar/Uni-Polar High Dynamic AC Servo Motor 60mm Low Inertia High Resolution Stepper Motor 0.9 Degree Step High Torque Stepper Motor Gearbox Right Angle Bevel Gear
Message Feedback