Overview
Mobility scooter motors drive the rear axle of three-wheel and four-wheel scooters used for outdoor and indoor transport. The drive is specified around occupant and scooter mass, ramp grade, target speed and the ability to hold position on a slope, with a gearbox and brake matched to the motor.
Construction
These drives use brushed DC or brushless DC motors combined with a worm or transaxle gearbox, an electromagnetic brake and a controller. The gearbox output drives the axle directly, and the housing is sealed against dust and light moisture.
Torque, Speed and Braking
A scooter must climb a specified ramp grade, travel at a controlled speed on pavement, and hold on a slope when stopped. Motor torque, gear ratio and brake holding torque are specified against these requirements, with the axle load and wheel diameter taken into account.
Controllability
Scooters are often driven by users with limited strength, so start, stop and low-speed steering must be predictable. Controller tuning and gear type are reviewed together during development.
Introduction
Detailed Parameters and Performance Data
Introduction
Jiangsu Retek Motion Co., Ltd. supplies mobility scooter motors for scooter manufacturers and mobility platform integrators. Each drive is specified against scooter mass, ramp grade, speed range and braking requirement.
How We Work
Retek operates motor, die-casting and CNC, and wire harness platforms. For scooter drives this allows the motor, transaxle housing and brake mounting to be developed together, which matters when the axle and the scooter frame are both fixed.
Engineering Approach
The team reviews scooter mass, ramp grade, target speed, wheel diameter and duty cycle before selecting motor type, gear ratio and brake. Prototypes are tested on the customer scooter or a representative load rig before volume release.
Applications
Advanced Technology Highlights
Applications
Three-wheel and four-wheel mobility scooters
Outdoor and pavement transport scooters
Indoor shopping and facility scooters
Golf and leisure carts
Custom mobility prototypes
Technical Specifications
Industrial & Commercial Usage
Specifications
| Parameter | Typical Range |
| Motor type | Brushed DC or brushless DC |
| Voltage | 24 V DC |
| Rated power | 120 to 400 W |
| Gearbox | Worm or transaxle |
| Brake | Electromagnetic parking brake |
| Axle | Differential or solid |
| Protection | IP54 or higher |
Additional Information
Supplementary Details & Notes
Production and Customization
Custom motor power, gear ratio and brake
Axle type and wheel mount per scooter frame
Sealed harness and connector per order
Ramp and hold testing on the customer scooter or rig
Prototype and volume production with batch traceability
About Jiangsu Retek Motion Co., Ltd.
As China Mobility Scooter Motors Manufacturers and Wholesale Mobility Scooter Motors OEM/ODM Suppliers, Retek business consists of three platforms: Motors, Die-Casting and CNC manufacturing and wire harness. Retek products are widely supplied for residential fans, vents, boats, airplanes, medical facilities, laboratory facilities, trucks and other automotive machines.
Welcome to send us an RFQ, it is believed you will get the best cost-effective products and services here!

Get in touch
English
Deutsch
中文简体
Español
